How to Clean Dyson Vacuum (Head and Filter)?

Vacuum cleaners have become an internal part of household cleaning. However, most people don’t really care about these devices. They simply use it to clean the house and keep it away.

If you follow the same routine, your vacuum cleaner might stop working. Even if you are using a Dyson vacuum, which is known for its durability, it might stop working.

In order to make the device last for a long time, you need to clean it after use. You will not face any problems while using the device if you regularly maintain it.

Maintenance means cleaning it from time to time. Like all other electronic appliances, vacuum cleaners also need maintenance.

Vacuum cleaners have to deal with lots of dust and debris on a daily basis. It is enough to make the internal parts dirty and wear them out.

Because of this reason, you need to open the device and clean all the internal parts.

What Happens When You Don’t Clean Your Vacuum Cleaner?

If you don’t clean your vacuum cleaner, there will be two consequences. Both these things will affect your vacuum cleaner and render it unusable.

  • Not Working: If you don’t clean your vacuum cleaner, it will stop working eventually. The dust and debris might create a blockage and damage the internal parts. You need to open the parts and clean them to make your vacuum device functional again.
  • Bad Smell: Another consequence will be a bad odour. When you don’t clean your cleaning device, mould will start appearing inside it thereby emanating a bad odour. If you still use it, the smell will get worse with time.

Cleaning Dyson Vacuum Cleaner:

If your vacuum cleaner is not working or smelling really bad, the first thing you need to do is open it and thoroughly clean the device.

While it is best to clean all the parts like, the brush, wand, filter and dust bag, you need to pay more attention to cleaning the head and filter.

These are two vital parts which keep the device functioning. Without the filter, you will not be able to use the device. The cleaner helps to suck all the dust and debris inside the device.

If you don’t know how to clean these two important parts of a vacuum cleaner, we can help you. Follow this guide to learn how to clean the Dyson vacuum head and filter.

How to Clean Dyson Vacuum Head?

The vacuum head contains important parts like the brush bar. It helps you to clean carpets by moving the dust, debris and pet hair out. If it stops working, you will not be able to properly clean your house. Follow these steps if you want to clean the vacuum head.

  • Step 1: Unplug the Device

The first thing you need to do is power off the device and remove the plug. This is a precautionary and safety measure you need to take.

  • Step 2: Remove the Brush

Once you unplug the device, you need to open the screws near the vacuum head to detach the brush. In most of the Dyson vacuums, the brush is detachable.

  • Step 3: Remove Dust and Pet Hair

Once the brush comes out, you need to use a scissor to cut through all the pet hair. Make sure you don’t damage any bristles. You can use your hand or any other hard brush to remove the dry dust and debris.

  • Step 4: Wash the Brush

Simply cleaning it with the hand is not enough. To clean the brush thoroughly, you need to submerge it in the water. Fill up your sink and add some detergent to clean the brush. The water will turn black with dust. Add clean water and repeat the process again.

  • Step 5: Add Vinegar and Scrub

If you want to remove the bad smell from the brush, you can add a bit of vinegar to the water. After that, use a brush to scrub off all the dust particles and hair.

  • Step 6: Dry and Comb

Once the brush is clean, you need to thoroughly dry it. You can let it air dry for 24 hours. Once it is dry, you can use a comb to clean the bristles. Comb through the bristles to remove any leftover dust. After cleaning the brush, you can assemble the vacuum cleaner.

How to Clean Dyson Vacuum Filter?

Dyson vacuum uses HEPA filters. It helps to clean 99.97% of dust and debris from your house. However, with time the filter gets clogged up with dust and debris. If you don’t clean it, the vacuum will stop working. Because of this reason, you need to clean the filter from time to time. Follow these steps to clean the filter.

  • Step 1: Check Instructions:

Before you start cleaning the filter, you need to go to the website and check the instructions. There are video tutorials given on the website to clean the filter. Follow the instructions.

  • Step 2: Unplug the Device

To start cleaning, you need to power off the device and remove the plug. This is a precautionary and safety measure you need to take.

  • Step 3: Remove the Filter

Once you unplug the device, you need to open the screws on the device and remove the filter. Some vacuum cleaners contain two filters. You need to remove both filter. Remove the pre-filter followed by the post filter.

  • Step 4: Clean the Filter

Now, you need to clean the dust from the filter. You can either use equipment or clean it with cold water. It is best to clean it in the sink with cold water.

  • Step 5: Soak and Wash

For better cleaning, you can soak the filters in cold water. Fill the sink with cold water and add a few drops of dish soap. After that, you need to soak the filters in the water and wash them. Turn the filters to drain out all the dust from inside. Change the water while cleaning. Once the water runs clear, you need to drain it.

  • Step 6: Air Dry

Once the filters are clean, you need to squeeze the water out of them and leave it to air dry. Leave it for 12 to 14 hours and assemble it in the device once it is dry.

These are the steps you need to follow in order to clean the Dyson vacuum head and filters. It will keep your device in working condition and remove bad odour.

Rate this post

Leave a Comment